Important - Setting the iCMP Pair Mode:
- Hold down the power button, which is along the right side of the device, until the device makes a chirping sound.
- When the card reader screen says "Copyright", quickly enter 2634 and hit the green button. Then hit the F button.
- Use the F2 key and scroll down to "BT Pairing". Hit the green button.
- Use the F2 key and scroll down to "Wake on BT". Hit the green button.
- Use the F2 key and scroll down to "Both(On)". Hit the green button.
- Restart the reader by holding down the power button.
Improving the Connection with the Sleep & Power Off Timers:
- After doing an initial credit transaction, return to "Dashboard" and tap "Back Office".
- Select "Settings", then tap "General" and tap "Card Reader" on the right
- Select the Ingenico iCMP card reader, which will display additional options to control the "Sleep Time Out" and "Power Off Time Out" at the bottom of the screen.
- Set both "Sleep Time Out" and "Power Off Time Out" to 0, so that the device doesn't turn off on its own. You have the option to set the time between 1 to 200 minutes.
Comments
0 comments
Please sign in to leave a comment.