The Mobility Kit comes with a hand strap, shoulder strap, rubber case, and plastic bag that includes connection to tablet to hold hand strap and shoulder strap in place. (See plastic bag that requires some assembly.)
Note : Phillips Size 00 Screwdriver Required; NOT Included.
Empty the contents of plastic bag with Plate, Screws, and Inserts for Hand or Shoulder Strap.
Note : The area in which you need to insert the screws may be covered by a sticker that reads Ingenico. Please remove the sticker to continue with steps.
Step 1: Insert plate to strap holder where handles are facing up or away from tablet. The Plate should align where the 2 screw holds
Step 2: On each end align with the screw holes on the back of the tablet. (See pic of back of tablet – looks like the #5 on dice)
Step 3: Put plate and strap holder connected and align with screw holes in back of tablet. It should ‘lock’ in upon proper fit.
Step 4: Take the 5 screws and a screwdriver and insert in the 5 holes provided to attach the Plate and Strap holder to the back of the tablet.
Step 5: Undo the Velcro straps to make it as thin as possible, and slide hand strap through strap holder. Then Velcro to your desired fit.
See below a Side and Back view of Hand Strap attached to Moby Tablet.
For the shoulder strap, just clip on each side of strap holder and carry over shoulder. See below.