Introduction to Newland N910
The Newland N910 Terminal is the newest card reader we will be supporting at talech. Newland includes 4G Support, faster printing, a larger printer paper roll, and an enhanced barcode scanner that uses dual thermal and picture cameras.
Newland also offers improved durability, a better battery life, and runs an updated version of the Android operating system.
If you have a dock station with your Newland Card Reader please know at this time it only supports the charging port.
Important to Know: Before you begin, ensure your battery is plugged into the Newland Card Reader to be fully charged.
Newland Requirements:
|
Available Region |
Compatible Peripherals |
Network Connection |
Elavon ONLY |
|
|
Additional Newland Features/Functionality:
- Network Connection is Wi-Fi, Bluetooth
- Front-Facing Camera with flashlight and ability to read barcodes
- Optional charging dock
- High-Powered internal battery, to last longer between charges
| Understanding your Newland Card Reader | ||||||
|
Overview
|
| Newland Setup Guide | ||||
|
Step by step instructions on how to set up your Newland device are below. Before you begin ensure you have all of the following items:
Next, follow the instructions on how to install the paper roll.
Paper Roll Installation:Step 1: Open the paper roll compartment
Step 2. Replace the paper roll in its correct orientation, leave a few inches of paper out.
Steps 3 and 4. Close the printer door. When the printer door is completely closed, you should hear a click sound.
Step 5. Gently pull the paper roll to make sure it is installed firmly. You can then remove the excess paper by tearing it along the serrated edge.
How to use Newland Device:How to Start or Shutdown the Newland Device
Step 1: Once your Device is turned ON you will be prompted to select your Language. Step 2: Now you will connect to your WiFi Connection. Step 3: After connecting, it may begin to update its software as required. This can take a few minutes. Allow the device to download, install, and reboot before getting started. |
| talech Register on your Newland Device |
|
The talech Register App is configured for automatic installation on your device. Look for the talech logo on your Newland Device. talech App on NewlandIf the talech register app is not found on the Newland screen after 24-hours: Step 1: Ensure your Newland is connected to your Wi-Fi Step 2: Write down the serial number on the back of your device Step 3: Contact talech support with the serial number and our support agents will assist you with getting talech installed on your Newland device. Important Note: If the talech icon does not appear initially, it may be installed during the service window which occurs at midnight each day. talech App Not Found on the Newland Device:If the talech register app is not found on the Newland Device complete the following: Step 1: Ensure your Newland is connected to your Wi-Fi Step 2: Write down the serial number on the back of your device Step 3: Contact talech support with the serial number and our support agents will assist you with getting talech installed on your Newland device.
|
Comments
0 comments
Please sign in to leave a comment.